www.naturalchoicewater.com
24
i
ndicator
e
rrors
The ION is programmed to alert you of certain functional errors that may occur
during use. The types of errors may vary depending on the situation.
Start-Up Errors
1. Ice Tank:
If the ice tank level sensor does not detect water after 250 oz.
(8 liters), the ION will stop filling, and display an error on the screen.
Power the ION OFF, and then back ON to reset the error. If error
continues to occur during initial start-up, please contact Technical Support
for further assistance.
2. Hot Tank:
If the hot tank level sensor does not detect water after 70 oz.
(2 liters), the ION will stop filling and display an error on the screen.
Power the ION OFF, and then back ON to reset the error. If error
continues to occur during initial start-up, please contact Technical Support
for further assistance.
3. Carbonation Tank:
If the carbonation tank level sensor does not detect
water after 45 seconds, the ION will stop filling and display an error on
screen. Power the ION OFF, and then back ON to reset the error. If error
continues to occur during initial start-up, please contact Technical Support
for further assistance.
Shut Down Errors
If you receive a "System Error" at any time, these errors will cause all functions
of your ION to shut down. This issue will need to be resolved by calling the
Technical Support Department at Natural Choice, or the dealer listed on your
Touch Screen.
The ION will not dispense water until the error has been cleared. For a list
of Shut Down Errors, please refer to the troubleshooting section of the Natural
Choice website
www.naturalchoicewater.com/shutdownerrors
.
