www.naturalchoicewater.com
8
r
equirements
Electrical and Plumbing Requirements
USA/CAN
Export Models
Voltage
120VAC, 60 HZ
230VAC, 50 HZ
Max Amp Load
11 amps/0.70
6 amps
Service Flow
1.0 gpm
3.8 lpm
Water Pressure
50–80 psi
3.5–5.5 bar
Incoming
Cold Water
Temperature
40–100o F
4.4–37 o C
Recommended Tools
■
Some plumbing tools and/or teflon tape may be required to make the
connection under the sink at the water supply.
■
In the event service is required on the ION, locate the Torx 20 wrench
behind the filter door to remove panel screws
(See photo page 7)
.
NOTE:
The crescent wrench and teflon tape may not be necessary depending
on water supply connection.
Torx 20 wrench
(located inside filter door)
Adjustable crescent wrench
Teflon tape
CO
2
wrench
(for Models 300 and 400, included
with the CO
2
regulator,
USA/CAN only)
Multi-Purpose Tool
(located inside filter door)
Hot Drain Extension Tool
