www.naturalchoicewater.com
ION TS Series Owners Manual
9
g
uideLines
Use the following guidelines to help ensure a proper ION installation:
■
DO NOT use tubing with less than a 180 PSI (13 BAR) rating.
■
If using adapter fitting from 3/4 inch GHT (USA/CAN) or BSP (Export
Models) to 1/4 inch line, do not connect copper line directly to push-
to-connect fitting. If building code or regulations require copper
tubing, contact Natural Choice Technical Support for connection
recommendations.
■
Make sure there are no sharp bends or kinks in the tubing. Allow extra
tubing to prevent stress on the fittings. Avoid tubing contact with other
objects and sharp edges.
■
All tubing used in the elbow fitting and shutoff valve must be clean, cut
square with a sharp knife or razor, and free of nicks and burrs.
■
If you need additional tubing, make sure it is 1/4 inch OD and meets
ANSI/NSF and FDA standards for drinking water. DO NOT use tubing
of an unknown quality or origin.
i
nstaLLation
!
CAUTION:
Risk of electric shock and damage to interior walls or leak and/or
flood if improperly installed.
Step 1: Connect the Plumbing
Method 1: Braided Hose with 3/4 inch GHT or BSP Fitting (Export).
1. Firmly tighten the hose to the back of the ION, and connect to the water
supply.
2. Check for water leaks at connection points.
Garden Hose
Thread
