www.naturalchoicewater.com
10
Method 2: Installation Kit with 1/4" Tubing (Purchased Separately)
1. Connect 1/4" plastic tubing to the nearest cold water supply.
2. Firmly push the other end of the tubing into the Elbow Fitting.
Thread the adapter fitting onto the H2O inlet and tighten firmly.
The stem of the Elbow Fitting is then pushed into the adapter fitting.
3. Turn Cold Water Supply ON and check for leaks.
i
nstaLLation
Shutoff
valve
Cold water valve
Undersink installations may vary.
Tubing going through
small hole in counter
