Native Instruments komplete kontrol s series, Руководство пользователя

Страница: 82 / 338

On the right display, you see the list of your Templates, as defined in the Inspector’s Tem-
plates pane.
1. Use Button 5 and 6 above the up and down arrows to scroll through the list and find the
Template you wish to load next. You can also turn Knob 5 or the Control encoder.
2. When you have it, press Button 8 (“ LOAD ”) to load the selected Template.
Like for the Knob Pages, this functionality is already available in many ways: in the Controller
Editor you can use the Template list (in the Inspector’s Templates pane), and on the MA-
SCHINE MK2 controller you can press SHIFT + Page buttons. The Template display mode al-
lows you a greater control over the Template selection from your controller though, for the rea-
sons already explained in the previous section for the Knob Pages.
When you reach the end of the list, you can choose whether the selection has to jump to
the other list end or stay on this last item. This can be set in
Preferences > General >
Wrap Template and Page Lists .
6.4.5 Monitor Display Mode
The Monitor display mode provides you with useful information about the MIDI data sent by
your MASCHINE MK2 controller.
The Monitor display mode provides information about the MIDI data sent by your MASCHINE MK2 controller.
The left display shows the usual information about the current Template, Knob Page and Pad
Page.
The right display shows two lines:
▪
The Control line indicates the control element that you are currently actuating.
▪
The Event line shows the details of the MIDI event being currently sent by this control ele-
ment.
Using Your MASCHINE MK2 Controller
The Displays
CONTROLLER EDITOR - Manual - 82