Native Instruments komplete kontrol s series, Руководство пользователя

Страница: 51 / 338

▪
If activated, you can switch the available Jog Wheel Pages by pressing the FUNCTION but-
tons (under the jog wheel) on your controller. The lit LED near the jog wheel (EDIT, CHAN-
NEL, BROWSE, TUNE, SWING or VOLUME) indicates which Jog Wheel Page is currently
active. You can also do this in the Controller Editor via the Jog Wheel Pages menu (in the
Hardware area) or the Jog Wheel Page list (in the Inspector).
▪
If deactivated, only one assignment can be set for the jog wheel and its LED ring. The
FUNCTION buttons can then be also assigned to MIDI commands.
4.3.6 Matrix Pages (MASCHINE JAM Only)
On the MASCHINE JAM controller, you also have access to optional pages of assignments
dedicated to the matrix buttons: the Matrix Pages. The Matrix Pages work like the Pages and
Knob Pages explained above, but they affect the 64 buttons of the 8 x 8 matrix.
The number of Matrix Pages is limited to eight. One Matrix Page can be selected at a time.
When you select another Matrix Page, all assignments for the 64 buttons are updated accord-
ingly. The eight available Matrix Pages are stored as an editable list on the
Pages pane in the
Inspector (you will find all details about the Inspector in section
↑
25.5, The Inspector ).
The Matrix Pages can be activated or deactivated, depending on your needs, via the Enable
Matrix Pages button in the Inspector’s
Pages pane:
▪
If activated, you can switch the available Matrix Pages via the Matrix Page menu (in the
Hardware area) or via the Matrix Page list (in the Inspector). You can do it as well from
your NI controller, via the Scene buttons (labeled from
1 to 8 ).
▪
If deactivated, only one assignment can be set for each button of the matrix. The Scene
buttons
1 – 8 can then be also assigned to MIDI commands.
4.3.7 I/O and Level Pages (MASCHINE JAM Only)
On the MASCHINE JAM controller, you also have access to optional pages of assignments
dedicated to the I/O and Level section: the I/O and Level Pages. The four available I/O and
Level Pages allow you to store four different assignments for the Control encoder and for the
LEVEL meters. Only one I/O and Level Page can be selected at a time.
The I/O and Level Pages can be activated or deactivated via the Enable I/O and Level Pages
button in the Inspector’s
Pages pane (you will find all details about the Inspector in section
↑
25.5, The Inspector ):
Basic Concepts
The Mapping System
CONTROLLER EDITOR - Manual - 51