By default the name defined in the Label Field is the MIDI message that will be sent by
this control element, but you can customize it to your liking, as in the picture above —
for more information, see section
.
From top to bottom, each display shows the assignment and the state of the following control
elements:
▪
1st row: FX buttons 1–4 above the display. Buttons in Off state are indicated by a dark
background, while buttons in On state are highlighted.
▪
2nd row: Mode Select buttons 1–4 under the display. Buttons in Off state are indicated by a
dark background, while buttons in On state are highlighted.
▪
3rd and 4th rows: Pads 1–8. The pad state is indicated in various ways depending on the
entry selected in the
Color Mode
menu in the
Assign
pane of the Inspector:
◦
In Single or Dual color mode, the pad’s On state uses the color set in the
Color Value
parameter (Single mode) or
Color On
parameter (Dual mode), while the pad’s Off state
uses the same color in a darkened version.
◦
In HSB color mode (only available if the
LED On
menu is set to
For MIDI Out
), the
pad’s states use white instead and is indicated as for buttons (Off state with a dark
background, On state highlighted).
For more info on the modes available in the
Color Mode
menu, see section
above.
▪
5th row: This row shows you the current Template. You can switch to the previous/next Tem-
plate by pressing the lit Performance Mode buttons (showing left and right arrows) on ei-
ther side of the display, as described in section
.
▪
6th row:
BROWSE
encoder and
LOOP
encoder (Turn action) right under the display. A little
bar indicates the current value of the Turn action of each encoder. Note that the bar can
have its zero at the left or in the middle, depending on the entry selected in the
Display
menu in the
Assign
pane of the Inspector — see section
25.6.8, Assignments for Analog
.
Using Your TRAKTOR KONTROL S5
The Displays
CONTROLLER EDITOR - Manual - 187
Содержание komplete kontrol s series
Страница 1: ......
