![background image](http://html.mh-extra.com/html/national-instruments/tbx-1303/tbx-1303_manual_710237006.webp)
©
National Instruments Corporation
5
TBX-1303 32-Channel Isothermal Terminal Block
4.
Connect either end of the SH96-96 cable to the TBX cable adapter
and SCXI module, and secure the cable by tightening both backshell
mounting screws.
5.
Connect the other end of the cable to the TBX-1303 terminal block
connector, and secure the cable by tightening both backshell mounting
screws.
Note
To minimize the temperature gradient inside the terminal block and to maintain its
isothermal properties for accurate cold-junction compensation (CJC), keep the TBX-1303
terminal block away from extreme temperature differentials.
Figure 2.
Connecting the SH96-96 Cable to the TBX-1303 Terminal Block
Note
The SH96-96 cable is not shown in the exact position for proper connection to the
terminal block connector. Refer to Figure 3 for the completed installation.
1
Backshell Mounting Screws
2
Shield Grounding Lugs
3
Captive Cover Screws
4
Terminal Block Connector
5
Signal Wire Entry
5
3
2
4
3
1
1