National Instruments NI DIDS-2003 Скачать руководство пользователя страница 35

Страница: 35 / 214

National Instruments Direct Injector Driver System Manual

3.2.3 Updating DI Driver System Controller Software

Occasionally NI will generate updates to the DI Driver System controller software and provide a link to the latest

update software on the

DI Driver System product page

. The software update is provided in the form of a .upd file

downloaded in a .zip file and is a complete hard drive image replacement for the cRIO controller.

NI provides an updater utility for download from the

DI Driver System product page

. The utility is called the DI Driver

System Updater and is provided in the form of a .zip file, along with the .upd file. The zip file contains a .exe file

which must be executed on the same Windows PC where SCM is installed.

*Note:

The .zip file downloaded contains both the .exe and .upd files.

The software update utility and associated .upd files are only compatible with existing DI Driver Systems using

cRIO-9076 and cRIO-9022 controllers. A software update cannot be performed on new cRIO controllers without a

working copy of the DI Driver System software.

NOTE:

The system controller network interface settings are not changed by updating the software image.

The DI

Driver System must be in static IP address mode for the update to restore correctly. For more information on

changing your system to static IP mode see

Changing The Network Settings Of The DI Driver System

To update the DI Driver System controller software, following the instructions below:

1. Take note of the DI Driver System software version on the Static Info tab of the

Execution Information

window of

the user interface.

2. Using a web browser, navigate to the

DI Driver System product page

and check the version of the software

update. If the software update is a later version than the currently running software, download it to the PC.

3. Download the updater utility zip file to the PC and unzip it to produce the executable.

4. Run the

DI Driver System Updater

utility to see the dialog shown below.

5. Enter the IP address of the DI Driver System in the

Target IP Address

field. Press the

refresh

button to the right.

The information window in the middle of the dialog will provide information about the controller discovered at the

Содержание NI DIDS-2003











































































































































































































Результаты поиска

Содержание NI DIDS-2003

Отзывы:

National Instruments NI DIDS-2003, Руководство пользователя, Страница: 35 / 214

Результаты поиска

Содержание NI DIDS-2003

Отзывы: