National Instruments NI DIDS-2003, Руководство пользователя, Страница: 175 / 214

National Instruments Direct Injector Driver System Manual
© 2013 National Instruments. All rights reserved.
Detail: Specifies the operating point which will be executed upon an error condition. This parameter is only
applicable if Undefined Trigger Behavior is set to Goto Error State or Multiple Trigger Behavior is set to
Goto Error State , and Ignore System Error is FALSE .
Number of OP Loops
Tip Strip: Number of operating point loops to execute. 0 = continuous.
Detail: Specifies the number of times to execute the complete set of operating points. A special value of zero
means that the cycle will repeat continuously. This parameter is only applicable to Timer Mode .
OP Loops Completed
Tip Strip: Indicates the number of operating point loops completed. This parameter is only applicable to
Timer Mode .
OP Mode
Tip Strip: Mode of executing operating points
Detail:
Timer Mode: Executes the number of points specified by Number of OP sequentially, according to the Time
value associated with each operating point.
Trigger Mode: Executes the operating point specified by the selected Process Variables and their
associated Wildcards .
Current Time/Trigger
Units: msec
Detail: Indicates the current timer value. This parameter is only applicable in Timer Mode .
Detail: Indicates the active trigger wildcard. This parameter is only applicable in Trigger Mode .