Table 11. User LEDs
LED
LED Color
Indication
USER1
Green/Yellow Use LabVIEW Real-Time to define the USER1 LED with the
RT LEDs VI. For more information about the RT LEDs VI,
refer to the
LabVIEW Help
.
USER
FPGA1
Green/Yellow Use the LabVIEW FPGA Module and NI Industrial Controller
Device Drivers software to define the USER FPGA1 LED.
Use the USER FPGA1 LED to help debug your application or
display application status. Refer to the
LabVIEW Help
for
information about programming this LED.
PoE LEDs
The PoE (Power over Ethernet) LEDs are located to the left of the PoE ports. The following
table describes the PoE LED indications:
Table 12. PoE LED Indications
PoE LED State
Indication
OFF
The corresponding PoE port is not supplying power.
ON
The corresponding PoE port is powering the connected device.
Ethernet LEDs
The Gigabit Ethernet ports have the following LEDs.
Figure 15. LEDs for the Gigabit Ethernet Ports
1
2
1. Speed LED
2. Activity/Link LED
Table 13. Ethernet LED Indications
LED
Status
Indication
Speed
OFF
No link, or 10 Mbps link
Green
100 Mbps link
Amber
1,000 Mbps link
18
|
ni.com
|
IC-317x User Manual