Table 14. DisplayPort Connector Pin Descriptions (Continued)
Pin
Signal Name
4
Hot Plug Detect
5
ML_Lane 1 (p)
6
Return
7
GND
8
CONFIG1
9
GND
10
ML_Lane 1 (n)
11
ML_Lane 2 (p)
12
GND
13
CONFIG2
14
AUX CH (n)
15
GND
16
ML_Lane 2 (n)
17
GND
18
ML_Lane 3 (n)
19
AUX CH (p)
20
ML_Lane 3 (p)
Ethernet Ports
The IC-3173 (IP67) provides one system Gigabit Ethernet network port and four Gigabit
Ethernet ports with Power over Ethernet (PoE). The Ethernet ports provide a connection
between the IC-3173 (IP67), a network, and other Ethernet devices. The IC-3173 (IP67)
automatically detects the speed of the connection and configures itself accordingly.
If a PoE-capable device is plugged into an Ethernet port with PoE, the IC-3173 (IP67)
automatically supplies power to the device. When you unplug a PoE device, PoE is
automatically disabled. You can use non-PoE Ethernet devices with PoE-enabled Gigabit
Ethernet ports.
(Windows only) The network Ethernet port provides Wake-on-LAN functionality from the
power off state when associated with the Intel
®
driver. Wake-on-LAN must be enabled in the
Power Management tab of the Intel I210 Gigabit Network Connection Properties dialog for the
primary Ethernet port in Device Manager. The NI GigE Vision driver (NI-GEV) does not
support Wake-on-LAN. The Ethernet ports with PoE do not support Wake-on-LAN.
IC-317x User Manual
|
© National Instruments
|
31