Table 1. DisplayPort Connector Pin Descriptions (Continued)
Pin
Signal Name
19
Return
20
DP_PWR
Ethernet Ports
The IC-317x provides one standard Gigabit Ethernet network port and four Gigabit Ethernet
ports with Power over Ethernet (PoE). The Ethernet ports provide a connection between the
IC-317x, a network, and other Ethernet devices. The IC-317x automatically detects the speed
of the connection and configures itself accordingly.
If a PoE-capable device is plugged into an Ethernet port with PoE, the IC-317x automatically
supplies power to the device. When the IC-317x supplies PoE, the LED that corresponds to the
port illuminates. When you unplug a PoE device, PoE is automatically disabled. You can use
non-PoE Ethernet devices with PoE-enabled Gigabit Ethernet ports.
A CAT 5e or CAT 6 1000Base-T Ethernet cable is required to achieve 1,000 Mbps (Gigabit)
Ethernet performance. CAT 5 Ethernet cables are not guaranteed to meet the necessary
requirements. While CAT 5 cables may appear to work at 1,000 Mbps, CAT 5 cables can cause
bit errors, resulting in degraded or unreliable network performance.
(Windows only) The network Ethernet port provides Wake-on-LAN functionality from the
power off state when associated with the Intel
®
driver. Wake-on-LAN must be enabled in the
Power Management tab of the Intel I210 Gigabit Network Connection Properties dialog for the
primary Ethernet port in Device Manager. The NI GigE Vision driver (NI-GEV) does not
support Wake-on-LAN. The Ethernet ports with PoE do not support Wake-on-LAN.
Figure 4. Ethernet Port Pin Locations (IP20)
1
2
3
4
5
6
7
8
IC-317x User Manual
|
© National Instruments
|
5