What to Do
Note
Refer to the
NI ELVIS RIO Control Module User Manual
and the
NI ELVIS II
Series User Manual
on
to identify ports and connectors.
1.
Position the NI ELVIS RIO CM on the NI ELVIS II Series Workstation.
2.
Slide the Workstation Interface Connector of the NI ELVIS RIO CM into the Prototyping
Board Connector on the workstation and ease it into place.
3.
Secure the NI ELVIS RIO CM to the workstation using two M4 mounting screws.
4
|
ni.com
|
NI ELVIS RIO CM Getting Started Guide
