or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution
To ensure the specified EMC performance, the length of the cable
connected to the USB device port must be no longer than 3m (10ft) and cable
connected to USB host port must be no longer than 30 m (100 ft).
Caution
To ensure the specified EMC performance, only use direct board-to-board
connections to connect myRIO Expansion Port (MXP) connectors.
Preparing the Environment
Caution
Clean the NI ELVIS RIO CM with a soft, nonmetallic brush. Make sure
that the device is completely dry and free from contaminants before returning it to
service.
Ensure that the environment in which you are using the NI ELVIS RIO CM meets the
following specifications.
Operating temperature
10 °C to 35 °C
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2)
-20 °C to 70 °C
Operating humidity (IEC 60068-2-78)
10% RH to 90% RH, noncondensing
Storage humidity (IEC 60068-2-78)
10% RH to 90% RH, noncondensing
Maximum altitude
2,000 m
Pollution Degree (IEC 60664)
2
Indoor use only.
Note
Refer to the
NI ELVIS RIO Control Module Specifications
for complete specifications.
Unpacking the Kit
Caution
To prevent electrostatic discharge (ESD) from damaging the device,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
2
|
ni.com
|
NI ELVIS RIO CM Getting Started Guide
