A-2
|
ni.com
Appendix A
Troubleshooting
•
You may be experiencing firewall issues. If you are having difficulty detecting the system
and setting up the NI CVS-1459RT on your network, you must configure the firewall to
open the TCP/UDP ports used by the NI CVS-1459RT and the host machine. Refer to the
following table for more information about TCP/UDP ports.
If your firewall is controlled remotely or you are unsure about configuring the firewall,
contact your network administrator.
No Software is Installed
If MAX or Vision Builder AI report that no software is installed, install application and driver
software on the NI CVS-1459RT. Refer to the
NI CVS-1459RT Getting Started Guide
for
installation instructions.
No Camera Found
Verify that the camera is properly connected and powered. Verify that the camera complies with
the USB3 Vision specification
.
Table A-1.
TCP/UDP Ports Used by the NI CVS-1459RT
Port
Type
Detail
s
3580
TCP/UDP
Reserved as nati-svrloc (NAT-ServiceLocator). Used by
Measurement & Automation Explorer (MAX) to locate remote
targets.
7749
TCP
Used for remote image display (not reserved).
7750
TCP
Used for NI-IMAQdx remote configuration (not reserved).
3363
TCP/UDP
Reserved as nati-vi-server (NATI VI Server). Used by Vision
Builder for Automated Inspection to configure a remote target.
