1-2
|
ni.com
Chapter 1
NI CVS-1459RT Overview
Figure 1-1.
NI CVS-1459RT Front Panel Connectors
Software Overview
Developing machine vision applications with the NI CVS-1459RT requires one of the following
software options:
•
NI Vision Builder for Automated Inspection (Vision Builder AI) 2014 or later
•
LabVIEW 2014 or later; LabVIEW Real-Time 2014 or later; the NI Vision Development
Module 2014 or later; and NI-IMAQdx 14.0 or later driver software, included with NI
Vision Acquisition Software August 2014
The NI CVS-1459RT has a user-reconfigurable FPGA that allows the I/O to be configured for
particular applications. Different configurations are referred to as hardware personalities, and
are defined by bitfiles. Use the following software to use and reconfigure the FPGA I/O.
•
LabVIEW FPGA Module 2012 or later—You must install the LabVIEW FPGA Module to
reconfigure the default personality of the NI CVS-1459RT FPGA.
•
NI-IMAQ I/O 14.0 or later driver software, included with NI Vision Acquisition Software
August 2014—NI-IMAQ I/O is required to use the default personality of the
NI CVS-1459RT in LabVIEW, or to reconfigure the default personality of the
NI CVS-1459RT I/O in the LabVIEW FPGA Module.
1
VGA Connector
2
RJ50 Serial Port
3
USB 2.0 Ports
4
RJ45 Gigabit Ethernet Network Port
5
USB3 Vision Ports
6
44-pin Digital I/O Connector
NI CVS-1459RT
Compact Vision System
RESET
DIGIT
A
L I
/O
10/100/
1000
ACT/
LINK
USER1
USER2
PWR/
FA
U
L
T
S
TAT
U
S
0
1
5
3
6
1
2
4
