National Instruments CVS-1459RT, Руководство пользователя

Страница: 17 / 53

© National Instruments | 2-3
NI CVS-1459RT User Manual
PWR/FAULT LED
The following table describes the PWR/FAULT LED indications.
USER1/USER2 LEDs
The USER1 and USER2 LEDs are user-accessible LEDs that can be controlled with the RT
LEDs VI, which is located on the RT Utilities palette in LabVIEW. Both LEDs are bicolor
Green/Amber LEDs.
Ethernet LEDs
Figure 2-2 shows the LEDs for the primary Gigabit Ethernet network port. The primary network
port provides a connection between the NI CVS-1459RT and the development computer.
Figure 2-2. LEDs for the Primary Gigabit Ethernet Network Port
Refer to Table 2-3 for information on the Ethernet LED indications.
Table 2-2. PWR/FAULT LED Indications
PWR/FAULT LED
(Green/Red) S tate NI CV S -1459RT S tate
OFF The NI CVS-1459RT is OFF. This is not an indication of
whether power is applied or not.
ON - Green The NI CVS-1459RT is operating normally and is properly
powered on.
Blinking - Red The NI CVS-1459RT power-up sequence failed.
1 Activity/Link LED 2 Speed LED
Table 2-3.
Ethernet LED Indications
LED S tatu s Definition
Activity/Link
Unlit No link has been established
Solid A link has been negotiated
Blinking Activity on the link
1
2