National Instruments cRIO-9063, Руководство пользователя

Страница: 27 / 28

2
1
4
3
4
3
1. Use a #1 Phillips screwdriver to remove the two screws from the back of the
chassis on the front-panel side.
2. Use the screwdriver and the two M3x20 screws to attach the adapter bracket
to the chassis.
3. Align one of the end brackets with the mounting hole at one of the ends of the
chassis.
4. Use a #2 Phillips screwdriver to tighten the captive screw on the end bracket.
5. Repeat steps 2 and 3 to attach the other end bracket to the other end of the
chassis.
© National Instruments
27
cRIO-9063 Features