National Instruments cRIO-9063, Руководство пользователя

Страница: 11 / 28

USB Device Port
The cRIO-9063 USB device port is intended for device configuration, application
deployment, debugging, and maintenance. For example, you can use the USB
device port to install software or driver updates during field maintenance instead of
interrupting communication on the RJ-45 Ethernet ports.
Caution
Do not hot-swap USB devices while the cRIO-9063 is in a
hazardous location or connected to high voltages. If the cRIO-9063 is not in
a hazardous location, you can connect and disconnect USB devices
without affecting operation.
The following table shows the pinout for the USB device port.
Description Signal Pin Pinout Pin Signal Description
USB data+ D+ 3
1 4
2 3
2 D- USB data-
Ground GND 4 1 VCC Cable power (5 V)
The following NI cable is available for the cRIO-9063.
Table 10.
USB Device Port Cable
Cable Length Part Number
NI Locking USB Cable 1 m 157788-01
Buttons
The cRIO-9063 provides the following buttons.
© National Instruments
11
cRIO-9063 Features