National Flooring Equipment 8000, Руководство пользователя, Страница: 9 / 68

Safety
www.nationalequipment.com Phone: 763-315-5300 9
RISK OF EXPLOSIVE GASES
Chargers can ignite fl ammable materials and vapors. Do not use near fuels, grian, dust, solvents, or other fl ammables. Batteries generate ex-
plosive gases during normal operation. To reduce the risk of battery explosion it is important each time, before using the charger, you read this
manual a manufacturer of any equipment you intent to use in the vicinity of the batteries or battery charger. Review all cautionary markings.
GASES, DUST, STEAM, SMOKE
Do not weld, fl ame cut or perform grinding work on the 8000 Propane Ride-On without written authorization from the manufacturer. The danger
of fi re or explosion exists when work of this nature is done. Begin maintenance work only when the machine is in Shut Down Mode (turned off).
SAFETY PRECAUTIONS (OPERATOR/PERSONNEL TRAINING)
Operating and maintenance personnel must verify availability of appropriate fi re protection equipment, be properly trained in the use of the
equipment and know how to contact the Fire Department or Emergency Medical Service if needed.
SAFETY PRECAUTIONS
• Only quali fi ed, trained personnel should operate this unit.
• Loose or damaged parts should be replaced immediately. Failure to do so could cause equipment damage or serious injury.
• Switches and levers should be inspected. Do not use if defective. Power on/off switch should return to off when lever is released.
• Turn ignition key to OFF position prior to performing maintenance. Motor and switches should be completely enclosed at all times with no
exposed wiring.
• Disconnect negative lead from ignition battery before servicing. Failure to do so can cause damage to electrical system and/or electrical
shock.
• Only use National components. Failure to do so could cause damage or serious injury.
• Always be aware of support personnel and their proximity when in operation. Block off work area.
• Support personnel should never stand next to machine, in front of or behind machine while machine is running. Failure to do so could
cause serious bodily injury or death.
• Manual should be kept with machine in supplied holder for access by operator at all times.
• Always wear eye and hearing protection when running machine.
• Never defeat switches or guards.
• Remove blade when machine is not in use and/or lower cutting head to fl oor. Failure to do so could cause serious bodily injury.
• Wear gloves when changing blades. Always shut machine off when changing blades.
• Turn propane valve OFF before servicing scraper.
BEFORE CARRYING OUT MAINTENANCE OR REPAIR WORK:
• Let the engine and the exhaust system, cool down.
• Remove all traces of oil, combustible fuel or cleaning fl uids from the scraper, its connections and fi ttings in particular.
• Do not use any aggressive cleaning products.
• Be sure that all cleaning rags are fi ber free.
• Retighten all loose fi ttings found during maintenance and repair work.