manualshive.com logo in svg

National Flooring Equipment 8000, Руководство пользователя, Страница: 15 / 68

Поделиться
Скачать
National Flooring Equipment 8000 Скачать руководство пользователя страница 15

Machine Operation

FIG. T

TO MOVE MACHINE WITHOUT POWER  (PUSHING MACHINE)

Forward:

 To move the machine forward, levers need to be pushed forward. To lock 

levers in place, connect a bungee-strap from each lever (pushing levers forward), pulling 
straps down to and connecting to the front plate (See Figure T). Never leave machine 
unattended with strap holding levers open.

Backward:

 To move machine backward, levers need to be pulled backwards. To lock 

levers in place, connect a bungee-strap from each lever (pushing levers backward), 
pulling straps to the back of the machine and connecting behind the seat or the rear of 
the machine (See Figure U). Never leave machine unattended with strap holding levers 
open.

MOVING MACHINE ON CASTER

Moving a “weighted” machine only on the front caster and not on the cutting head or the 
Front Wheel Assembly can seem to make the machine turn sluggish.  It might turn hard 
to the right or the left.  This is normal. 

WHEEL SIZE

The 21’’ wheel comes standard on the machine. This wheel will work on all job types of 
application and heavy debris build-up (VCT, ceramic etc.). It also works best for slippery/
slimy residue, ie. double stick. 
Keep wheels clean and free of debris, make sure it can move freely. Clean as needed. 
Inspect before each use. 
To change wheels, see Wheel Changing on page 26.

CUTTING HEAD & BLADES

DIALING IN THE MACHINE

Dialing in the machine is matching the correct cutting head, blade size, blade angle and 
added weight to the machine to make the material removal as easy as possible. For 
every material being removed, there is an optimum blade width, thickness, sharpness, 
angle and bevel (bevel up or bevel down).

SAVING TIME WITH EXTRA CUTTING HEADS

The machine is supplied with one cutting head. Having additional cutting heads will save 
time on the job. Insert blades into the extra cutting heads before starting a job. When 
the blade is dull, instead of taking the time to replace it or sharpen it on the job, take out 
the cutting head and replace it with another. Or when a different type or size of blade is 
needed, you have them ready to use.

FIG. U

15

WARNING:

 ALWAYS REMOVE STRAPS BEFORE STARTING MOTORS. 

FAILURE TO DO SO WILL MAKE MACHINE MOVE AND MAY CAUSE PROPERTY 
DAMAGE AND/OR BODILY INJURY.

WARNING:

 WHEN DOING MAINTENANCE OR CHANGING A WHEEL, MAKE 

SURE MACHINE IS SUPPORTED PROPERLY OR SERIOUS INJURY COULD 
OCCUR.

Fax: 763-535-8255

[email protected]

Содержание 8000





































































Отзывы:

Нет отзывов