National Flooring Equipment 8000, Руководство пользователя, Страница: 8 / 68

Safety
8
4. Coupling Blow-off: If the assembly is not properly made or installed, the coupling could come off and hit or spray a worker, possibly
resulting in serious injury. Never operate machine without guards.
FLAMMABILITY
With the exception of those comprised primarily of water, all hydraulic fl uid is fl ammable when exposed to the proper conditions (including many
“ fi re-resistant” hydraulic fl uids).
Leaking pressurized hydraulic fl uids may develop a mist or fi ne spray that can fl ash or explode upon contact with a cause of ignition. These
explosions can be very severe and could result in serious injury or death.
Precautions should be taken to eliminate all ignition sources from making contact with escaping
fl uids, sprays or mists resulting from hydraulic
failures. Sources of ignition could be electrical discharges (sparks), open fl ames, extremely high temperatures, sparks caused by metal -to -metal
contact, etc.
HYDRAULIC FLUID
Only use Texaco Rando 46 Hydraulic Oil or Compatible Fluid like IS032. Non-compatible fl uids could cause damage to unit or serious injury.
SAFETY SWITCH
The 8000 Propane Powered Ride-On has been equipped with a safety switch under the seat, which requires the operator to be seated before
the 8000 can be operated. Do not attempt the start-up procedure with out being seated on the machine.
USE CARBON MONOXIDE DETECTOR WHEN OPERATING MACHINE
Included with the 8000 are a 75007 lapel CO Monitor and a 75008 Clip. it is recommended that the operator and anyone in the working vicinity
wear the detector. Failure to do so could cause bodily injury and/or death. The use of detectors helps to verify if work area is safe from Carbon
Monoxide poisoning. The detector has an adhesive strip on the back for mounting or can be worn with the included clip. It can detect as little
as 100ppm (part per million) carbon monoxide gas at approximate relative humidity range of 33 to 50%. if the humidity is very high it can detect
concentrations as low as 20ppm. the presence of CO will change the impregnated silica color change from red to red/brown and then to gray/
black as the concentration levels increase. once the detector is exposed to fresh air, it will return back to red. Shelf life in an unopened pack
is approximately two to three years (expiration date is visible through unopened package on the back). once opened it should be replaced
approximately every ninety days. Write date opened in provided area on the front of the detector. read further user directions on the back of the
detector.
FIRST AID
Immediately fl ush eyes with cold, fresh water for a minimum of 10 minutes if electrolytic acid comes in contact with eyes. Seek professional
medical attention.
VENTILATION
Blocking louvers or air fl ow perforations of convection or fan cooled battery chargers and/or machine will result in damage to the unit. When
utilizing the unit leave space for air to fl ow freely through the intake and discharge louvers and/or perforations.
Fax: 763-535-8255 info@nationalequipment.com
WARNING: SILICA DUST WARNING
SCRAPING/GRINDING/CUTTING/DRILLING OF MASONRY, CONCRETE, METAL AND OTHER
MATERIALS CAN GENERATE DUST, MISTS AND FUMES CONTAINING CHEMICALS KNOWN TO CAUSE SERIOUS FATAL INJURY OR ILL-
NESS, SUCH AS RESPIRATORY DISEASE, CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. IF YOU ARE FAMILIAR WITH
THE RISKS ASSOCIATED WITH THE PARTICULAR MATERIAL BEING CUT, REVIEW THE MATERIAL SAFETY DATA SHEET
AND/OR CONSULT YOU EMPLOYER, THE MATERIAL MANUFACTURER/SUPPLIER, GOVERNMENTAL AGENCIES SUCH
AS OSHA AND NIOSH AND OTHER AUTHORITIES ON HAZARDOUS MATERIALS. CALIFORNIA AND SOME OTHER AU-
THORITIES, FOR INSTANCE, HAVE PUBLISHED LISTS OF SUBSTANCES KNOWN TO CAUSE CANCER, REPRODUCTIVE
TOXICITY, OR OTHER HARMFUL EFFECTS. CONTROL DUST, MIST AND FUMES AT THE SOURCE WHERE POSSIBLE. IN
THIS REGARD USE GOOD WORK PRACTICES AND FOLLOW THE RECOMMENDATIONS OF THE MANUFACTURER/SUP-
PLIER, OSHA/NIOSH, AND OCCUPATIONAL AND TRADE ASSOCIATIONS. WHEN THE HAZARDS FROM INHALATION OF
DUST, MISTS AND FUMES CANNOT BE ELIMINATED, THE OPERATOR AND ANY BYSTANDERS SHOULD ALWAYS WEAR
A RESPIRATOR APPROVED BY OSHA/MSHA FOR THE MATERIAL BEING CUT.