Safety
www.nationalequipment.com
Phone: 763-315-5300
9
GASES, DUST, STEAM, SMOKE
Do not weld,
fl
ame cut or perform grinding work on the 5625 Propane Ride-On without written authorization from the manufacturer. The danger
of
fi
re or explosion exists when work of this nature is done. Begin maintenance work only when the machine is in Shut Down Mode (turned off).
SAFETY PRECAUTIONS (OPERATOR/PERSONNEL TRAINING)
Operating and maintenance personnel must verify availability of appropriate
fi
re protection equipment, be properly trained in the use of the
equipment and know how to contact the Fire Department or Emergency Medical Service if needed.
SAFETY PRECAUTIONS
• Only
quali
fi
ed, trained personnel should operate this unit.
•
Loose or damaged parts should be replaced immediately. Failure to do so could cause equipment damage or serious injury.
•
Switches and levers should be inspected.
•
Turn ignition key to Off position prior to performing maintenance on scraper.
•
Motor and switches should be completely enclosed at all times with no exposed wiring.
•
Disconnect negative lead from ignition battery before servicing. Failure to do so can cause damage to electrical system and/or electrical
shock.
•
Only use National components. Failure to do so could cause damage or serious injury.
•
Always be aware of support personnel and their proximity when in operation. Block off work area.
•
Support personnel should never stand next to machine, in front of or behind machine while machine is running. Failure to do so could
cause serious bodily injury or death.
•
Manual should be kept with machine in supplied holder for access by operator at all times.
•
Always wear eye and hearing protection when running machine.
•
Never defeat switches or guards.
•
Remove blade when machine is not in use and/or lower cutting head to
fl
oor. Failure to do so could cause serious bodily injury.
•
Wear gloves when changing blades. Always shut machine off when changing blades.
•
Turn propane valve off before servicing scraper.
BEFORE CARRYING OUT MAINTENANCE OR REPAIR WORK:
•
Let the engine and the exhaust system, cool down.
•
Remove all traces of oil, combustible fuel or cleaning
fl
uids from the scraper, its connections and
fi
ttings in particular.
•
Do not use any aggressive cleaning products.
•
Be sure that all cleaning rags are
fi
ber free.
•
Retighten all loose
fi
ttings found during maintenance and repair work.
Содержание 5625
