National Auto Tools NSS-8000, Инструкция по эксплуатации

Страница: 4 / 13

4
NEVER overload your lift. Manufacturer’s rated capacity is shown on
nameplate affixed to the lift. ALWAYS know the gross weight of vehicle.
NEVER use the lift to raise one end or one side of vehicle.
NEVER raise vehicle with anyone inside it. No one should be in the lift area
during operation.
ALWAYS keep lift area free of obstructions, grease, oil, trash and other
debris. Before lowering lift, be sure tool trays, stands, etc. are removed
from under vehicle. Release locking devices before attempting to lower lift.
Adequate ventilation should be provided when working on internal
combustion engines.
Use only manufacturer’s recommended attachments.
KEEP HANDS AND FEET CLEAR. Remove hands and feet from any moving
parts. Keep feet clear of lift when lowering. Avoid pinch points.
GUARD AGAINST ELECTRIC SHOCK. This lift must be grounded while in
use to protect the operator from electric shock.
DANGER! The power unit used on this lift contains high voltage.
Disconnect power at the receptacle before performing any electrical
repairs. Secure plug so that it cannot be accidentally plugged in during
service.
WARNING! RISK OF EXPLOSION. This equipment has internal arcing or
sparking parts which should not be exposed to flammable vapors. This
machine should not be located in a recessed area or below floor level.
MAINTAIN WITH CARE. Keep lift clean for better and safe performance.
Follow manual for proper lubrication and maintenance instructions. Keep
control handles and/or buttons dry, clean and free from grease and oil.
STAY ALERT. Watch what you are doing. Use common sense. Be aware.
CHECK FOR DAMAGED PARTS. Check for alignment of moving parts,
breakage of parts or any condition that may affect its operation. Do not use
lift if any component is broken or damaged.
NEVER remove safety related components from the lift. Do not use lift if
safety related components are damaged or missing.