National Auto Tools NSS-8000, Инструкция по эксплуатации

Страница: 3 / 13

3
3.
Make sure all cables are on pulleys before operating your
lift.
4.
Always lower your lift onto the safety locks; this will
protect your power unit. Your power unit will not raise a
car while the pump is loaded.
5.
Before using your lift, lubricate the inside of the four
columns. WD-40 or spray silicate works best.
6.
Do not over tighten the hydraulic fittings.
We have sold over 25,000 of these style lifts. These six things
are the most common mistakes people make. If you will follow
your manual and avoid these pitfalls, you will be proud of your
lift.
IMPORTANT SAFETY INSTRUCTIONS
Read these safety instructions entirely!
Failure to read these instructions may result in injury to user, other people
within the area of the lift, or vehicles. We are not responsible for any injury
or damage as a result of neglecting to carefully read and follow these
instructions.
Always lock the lift in place before going under the vehicle. Never allow
anyone to go under the lift when raising or lowering.
INSPECT your lift daily. Never operate if it malfunctions or if is has broken
or damaged parts. Repairs should be made with original equipment parts.
ATTENTION! LOOK OUT!
Routine check of safety latch system is very important - the discovery of
device failure before needed could save you from expensive property
damage, lost production time, serious personal injury and even death.
Operating controls are designed to close when released. Do not block open
or override them.