Natcomm
Page 7
LOCK CONTROL
Your DS6 is provided with TWO internally fitted relays which can be used to control
TWO LOCKS or ONE LOCK and ONE OTHER DEVICE such as a Video Camera,
Recorder or Light.
Relay Specification - Dry Relay Contacts rated at 12V/1Amp.
Do not use the supplied DS6 Controller 12V plug pack to also provide 12V power
for the lock, as this may cause damage to DS6.
You must use a separate 12V source, with a maximum rating of 12V/1A.
LOCK 1 FACILITY
To OPEN the Door/Gate Lock after answering a call from your DOOR PHONE you
need to press
**
on your telephone. The lock will remain open for 10 seconds (Default
setting). It can be set from 01-99 secs.
Your Door/Gate Lock can also be OPENED at any time by picking up any telephone
and Dialing
**
. The Door/Gate Lock will remain UNLOCKED for 10 seconds (can be
01-99 secs).
You can also control Lock 1 by Calling the Extension Number that DS6 is connected
to. It will answer after 2 rings and then listen for DTMF Lock commands.
LOCK 2 FACILITY
To OPEN the ALTERNATIVE Door/Gate Lock after answering a call from your DOOR
PHONE you need to press
*2
on your telephone. The lock will remain open until you
HANG UP your telephone.
Your ALTERNATIVE Door/Gate Lock can also be OPENED at any time by picking up
any telephone and dialing
*2
. The Door/Gate Lock will be LOCKED as soon as you
hang up. You do not need to receive a call from the Door Phone first.
You can also control Lock 1 by Calling the Extension Number that DS6 is connected
to. It will answer after 2 rings and then listen for DTMF Lock commands.
With the LOCK 2 facility, you can also press
*3
and then HANG UP at any time, which
will CLOSE the Internal Relay and leave it closed.
You can then press *4 and then HANG UP at any time, which will OPEN the Internal
Relay and leave it open.
