Page 16
Natcomm
D.
LOCK 2 SET UP
To set LOCK 2 to control a SECOND LOCK press #200
To set LOCK 2 to SWITCH ON/OFF a device press #2xx
00 = Lock 2 will remain open after detection of *2 until hang up.
xx = time limit in seconds that attached device remains ON after hang up.
xx = can be set from 01-99 (seconds)
(for example, press #230 for 30 seconds)
E.
DIAL OUT DELAY
To increase the DIAL OUT DELAY press #5x
x = Dial Out Delay in seconds
If x = 0 - delay is 2.0 seconds If x = 5 - delay is 4.5 seconds
If x = 1 - delay is 2.5 seconds If x = 6 - delay is 5.0 seconds
If x = 2 - delay is 3.0 seconds If x = 7 - delay is 5.5 seconds
If x = 3 - delay is 3.5 seconds If x = 8 - delay is 6.0 seconds
If x = 4 - delay is 4.0 seconds If x = 9 - delay is 6.5 seconds
F.
RESET TO FACTORY DEFAULT SETTINGS
To RESET to Factory Defaults, press
13579
TO EXIT PROGRAMMING MODE - HANG UP.
ALL ENTRIES ARE SAVED IN PERMANENT MEMORY
.
