Natcomm
Page 15
PROGRAMMING PROCEDURE
1.
TURN OFF POWER TO YOUR UNIT
2.
SWITCH ON POWER AND PRESS #
(Wait for Line to go silent and press # within 10 seconds)
(You MUST use a telephone connected to Line Out to do this).
3.
YOUR UNIT WILL OUTPUT 3 SHORT ‘BEEPS’
Do not proceed until you have heard 3 short beeps.
If you do not hear 3 beeps, return to the start (1).
4.
ENTER ANY PROGRAMMING COMMANDS AS FOLLOWS:
(Note - You can change one or more parameters in any order)
A.
MAXIMUM DOOR PHONE CALL TIME
To enter the MAX CALL TIME press #3xx
xx = time limit in seconds and can be 15-99
(for example, press #360 for 60 seconds)
Note : If you enter * before the 15-99, it will increase the maximum Dial Out
call time by 10 times Ie; entering #3*50 will set a maximum dial out time of
500 seconds, instead of 50 seconds.
B.
DIAL OUT FACILITY
To enter the DIAL OUT TELEPHONE NUMBER
press **x**
x = complete phone number.
ie : if the Dial Out Telephone Number is 0401 234 567 you should press
**0401234567**
C.
LOCK 1 SET UP
To enter the LOCK 1 OPEN TIME press #6xx
xx = time limit in seconds that LOCK 1 will remain open after pressing **. It
can be set from 01-99 (seconds)
(for example, press #630 for 30 seconds)
