INTELLIREAM
®
MP
pg.
21
2. CLAMP function: Press the
“CLAMP” button to close and open the clamp. Check that the “CLAMP”
LED on the control module changes from green to red when the clamp is closed.
WARNING: the clamp will operate under this condition. KEEP HANDS
CLEAR of the operating space of the clamp and wire cutter. This device is
intended for one-man operation during test.
Note:
The LEDs on the control module will flash red from this point on in the
sequence to indicate
CAUTION
for the operating devices being tested.
3. MOTOR function: With the reaming bit raised, press both the
“CLAMP” button and “LIFT” button to test
the
“Motor” solenoid.
WARNING: the motor will operate under this condition. KEEP HANDS
CLEAR of the operating area of the reaming bit. Do not operate with
exposed long hair, jewelry, or loose clothing. This device is intended for
one-man operation during test
