NASAN ST WIN, Руководство по обслуживанию

Страница: 31 / 67

Rev 8, Dated 27-2-2018 31
22. Fit wires coming from AC Motor in connector CON 11 as
[B|R|G].
23. Short 2 Pin MCB connector CON 13 with wire.
24. Remove old emergency switch wiring.
25. Make 10.5 mm hole on the side cover of Treadmill in line with
15 pin D type connector leaving 50 mm distance from top cover.
26. Open the Emergency Stop Box. If it is metallic, use new plastic
EMG Box.
27. Take new 3 Core AC Mains cable. Cut the Yellow/Green wire as
we won’t require it.
28. Insert Red wire at one end of Red colored connector of EMG
switch and Black wire to another end of same connector. Other
end of cable should be inserted in CON 12 of ACDC Drive.
29. Care should be taken while looping mains wire. It should not be
loose as it may collide with Rack.
30. Mains Wiring: Bring Red wire of Mains to one end of MCB switch
fitted on Treadmill and from other end on MCB bring out 2.5
sq.mm red wire, loop it at sides of ACDC Drive and connect to
LIVE (L) point of AC Mains connector CON 10. Bring black wire
from 3 core AC Mains cable looped at side of ACDC Drive and
connect to NEUTRAL (N) point of CON 10. Connect Yellow/Green
wire to Earthing Fitting screw of ACDC Drive Box (M5 X 30)
using earthing clip.
31. Connect 15 Pin D type Male Connector on other side of cable
which goes to 15 Pin D Type Female Connector fitted on side of
Treadmill (where TPC is to be inserted). Do connections pin to
pin for both connectors (pin1 & pin4 to pin11) as per diag.
32. Solder 3 pin Relimate female connector to 10K pot as per circuit
diagram and insert it on connector CON 6 as [Bl|Br|R].
33. Turn ON the Treadmill.
34. Increase treadmill speed manually by shorting Pin1 & Pin9. If
belt rotates in opposite direction, reduce speed by shorting Pin1
& Pin10 of 15 pin D type connector for TPC cable.
35. Interchange A+ & A- connections at CON 15 and Check treadmill
response again.
36. Check treadmill grade by shorting Pin1 & Pin7 to increase and
Pin1 & Pin8 to decrease.
37. Fit top cover of ACDC Drive.
38. Fit the Treadmill cover and check with Software.