Narex EDH 82, Оригинальное руководство по эксплуатации

Страница: 15 / 36

English
15
Technical data
Planer
Type EDH 82
Voltage. 30.V
Frequency. 50–60.Hz
Power.input. 900.W
Power.output. 470.W
Motor.speed:. no-load. 1.000.min
-1
. rated.load. 10.000.min
-1
Planing.depth. 0–3.mm
Planing.width. 8.mm
Weight.(without.accessories). 3,6.kg
Protection.class. II./.
Operating control elements
1 ............Mains Switch
2 ............Lock-off button
3 ............Main handle
4 ............Front handle, swiveling (for planing depth adjustment)
5 ............Planing depth scale
6 ............Front shoe, adjustable
7 ............Fixed shoe
8 ............Guiding edge of the adjustable and fixed plate shoes
9 ............Air inlet openings
10 ..........Dust discharge openings
11 ..........Dust directing flap deflector
12 ..........„V“ groove for chamfering
13 ..........Cutting head with blades (delivered as a part of the planer)
14 ..........Carbide-tipped reversible blades
15 ..........Blade fixing screws
16 ..........Tilting guard of the cutting head
17 ..........Hole for attachment of the rabbeting depth guide or the
stationary equipment support
18 ..........Hole for attachment of the tilting parallel guide
19 ..........Scale for adjustment of rabbeting width
20 ..........Tilting parallel guide scale
21 ..........Dust collection bag
22 ..........Zip fastener
23 ..........Dust- extraction adapter
24 ..........Flange
25 ..........Fixing screw
26 ..........Washer
27 ..........Left reinforcing spring
28 ..........Right reinforcing spring
29 ..........Adapter fixing screws
30 ..........Spanner (No. 8 – delivered with the planer)
31 ..........Support frame
32 ..........Rubber plug
33 ..........Fixing screw M6x55
34 ..........Fixing screw M6x85
35 ..........Yoke fixing screw M6x45
36 ..........Rabbeting depth guide
37 ..........Spacer
38 ..........Plastic wing nut
39 ..........Washer
40 ..........Yoke
41 ..........Yoke fixing screws
42 .......... Torsion spring
43 ..........Swiveling guard
44 ..........Fixing screw M5x16
45 ..........Locking strap
The accessories shown or described in this Operating Instructions Man-
ual may not be included as a part of the delivery.
Double insulation
To ensure maximum safety of the user, our tools are designed and built
to satisfy applicable European standards (EN standards). Tools with
double insulation are marked by the international symbol of a double
square. These tools must not be grounded and a two-wire cable is suf-
ficient to supply them with power. Tools are shielded in accordance
with EN 50114.
Operating instructions
The universal electric hand-held planer is designed for machining of
wood, or similar materials and soft plastics, for planing, leveling of sur-
faces, rabbeting and chamfering.
The hand-held planer application range could be expanded by the use
of accessories offered exclusively by the NAREX company, the list of
which is enclosed to this Operating Manual.
The manufacturer disclaims liability for the damages caused by un-
authorized interventions into the electric tool, or damages caused by
unauthorized interventions into the electric tool, or damages caused by
using the hand-held planer with the accessories other than the original
supplied ones. The sole responsibility for damages and accidents caused
by incorrect use of the electric tool shall be borne by the user.
Special safety instructions
Check attachment of the cutting blades before starting to of work.
The plug of the power supply cord may be connected to the mains
outlet only with the tool switch in the OFF position.
Always keep the power supply cord back away from the planer
while working.
Before switching the electric tool ON, check, if all adjustment keys
or wrenches have been removed.
Turn or exchange blunt knives in good time, the risk of kickback is
otherwise increased.
For planing short workpieces, a lead-in box must be used. In case of
stopping the planer on the machined planed surface, use suitable
attachments must use for prevention of kickback.
Unauthorized use of the electric tool, not complying with this Oper-
ating Manual, may lead to a personal injury.
Use only the accessories recommended by the manufacturer of the
planer.
Use only the original spare parts.
Use safety glasses and ear protection while working with the
planer.
Use only the original cutting heads identical to the one supplied
with the electric tool.
When working with the planer infixed to the stationary support,
always use the cutting head guard supplied with the stationary
support.
Use a push stick for machining small workpieces (with the station-
ary support).












