Narex EBP 65, Оригинальное руководство по эксплуатации

Страница: 15 / 36

English
15
Technical data
Belt sander
Type EBP 65 EBP 65-E3
Supply.voltage. 30.V. 30.V
Power.frequency. 50–60.Hz. 50–60.Hz
Power.input. 600.W. 600.W
Power.output. 30.W. 30.W
Belt.speed:
. -.free.wheel. 180.min
-1
. 140–190.min
-1
. -.rated.load. 165.min
-1
. 10–170.min
-1
Belt.speed.pre-selection:.
û
.

Abrasive.belt.length. 410.mm. 410.mm
Abrasive.belt.width. 65.mm. 65.mm
Dust.exhaust.connection.  . 
Weight.(accessories.excl.). .5.kg. .5.kg
Protection.class. II./. . II./.
Controls
1 ............Dust bag
2 ............Abrasive belt
3 ............Tensioning lever
4 ............Belt run direction indication
5 ............Air vents
6 ............Turning knob for belt run adjustment
7 ............Vacuum neck
8 ............Cover
9 ............Latching switch pin
10 ..........Belt speed adjustment wheel (EBP 65-E3)
11 ..........Switch
12 ..........Vacuum adapter
13 ..........Toothed belt
14 ..........Belt wheel
15 ..........Driving wheel
16 ..........Bolt
17 ..........Parallel stop*
18 ..........Stationary plant*
The displayed or described accessories need not be included in the de-
livery package.
Double insulation
To ensure maximum safety of the user, our tools are designed and built
to satisfy applicable European standards (EN standards). Tools with
double insulation are marked by the international symbol of a double
square. These tools must not be grounded and a two-wire cable is suf-
ficient to supply them with power. Tools are shielded in accordance
with EN 50114.
Use
The machine is designed for dry grinding at high draught on wooden,
plastic, metal and bonded surfaces and also for grinding polished sur-
faces.
The user himself is responsible for an improper use.
Safety Instructions
The machine can only be used for dry grinding.
No asbestos material can be processed.
Always lead the movable supply in the direction from the tool
backwards.
Make sure the work piece is fixed properly.
Lead the machine against the work piece only if it is turned on. Turn
the machine off only after you remove it from the work piece.
Always hold the machine with both hands and secure a safe pose
during the work.
Do not use any worn and strongly contaminated abrasive belts any
longer.
Do not touch the abrasive belt when it runs.








When metals are ground, sparks fly off. Make sure no people are
jeopardised. Due to the fire hazard no flammable materials can oc-
cur in the proximity of the machine (the area of sparks fly-off).
Before you put the machine off make sure you turn it off and let
it run down.
Do not carry the machine by the cable.
Dust and splinter exhaust (c)
WARNING! The dust originated during the work can be del-
eterious, flammable and explosive. Therefore adequate pro-
tective measures must be taken:
– the beech and oak wooden dust is cancerogenic, therefore use the
dust exhaust and wear a respirator.
– the metal dust that originates e.g. during light metals working can
be explosive or flammable; therefore work only in well ventilated
places.
Dust bag mounting
Put the dust bag (1) with the adapter on the vacuum neck (7).
Make sure the adapter snaps in the vacuum neck.
Dust bag emptying
To ensure an ideal exhaust of the dust material empty the dust bag
regularly.
Remove the dust bag off the machine.
Release the dust bag on the upper end of the adapter, pull it down and
empty it.
When you put it back again make sure the dust bag fits in the adapter
groove.
External exhaust by means of a vacuum cleaner
In combination with the vacuum adapter (12) a vacuum cleaner can be
used for the exhaustion.
Use a special vacuum cleaner for the exhaustion of an especially delete-
rious carcinogenic dry dust.
The vacuum cleaner must be suitable for the exhaustion of the respec-
tive worked material.
Commissioning and operation
Check whether the type of the plug corresponds with the type of the
socket. Check whether the data on the name plate correspond with the
actual power supply voltage. The tools designed for 230 V may be con-
nected also to 220 / 240 V.
Switching on and off
By pressing the switch button (11) the machine activates, whilst releas-
ing the button stops it.


