NARDA LR-01 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 194

NARDA LR-01 Скачать руководство пользователя страница 61

Installation and use

2-1

2 - Installation and use

2.1 Introduction

This  section  provides  the  information  required  for  installing  and  using  the
LR-01 Programmable Logger Repeater.
Information  is  included  regarding  initial  inspection,  power  requirements,
interconnections,  work  environment,  assembly,  cleaning,  storage  and
shipment.

2.2 Preliminary
inspection

Inspect the packaging for any damage.

If the packaging or anti-shock material have been damaged, check
that the contents are complete and that the repeater has not suffered
electric or mechanical damage.
Check that all the Accessories are there against the checklist found
with the apparatus.
Inform the carrier and NARDA of any damage that has occurred.

2.3 Work environment

The work environment of the Accessories, must come within the following
conditions:

•

Temperature

•

Humidity

From -20° to +55° C
< 95% relative

The repeater must be stored in a clean and dry environment, free from acid
dusts and humidity.
The storage environment must come within the range of the following
conditions:

•

Temperature

•

Humidity

From -30° to + 75° C
< 95% relative

2.4 Return for repair

When  the  repeater  needs  to  be  returned  to  NARDA  for  repair,  please
complete the questionnaire appended to this User’s Manual, filling in all the
data that will be useful for the service you have requested.
For reducing the period of time required for the repairs, it is necessary to be
as specific as possible in describing the problem. If the problem only occurs
in certain circumstances, please describe in detail how it happens.
If possible it is better to reuse the original packaging; making sure that the
apparatus is wrapped in thick paper or plastic.
Otherwise,  use  strong  packaging  by  using  a  sufficient  quantity  of  shock
absorbent  material  around  all  sides  of  the  repeater  to  ensure  that  it  is
compact and does not move around inside the package.
In particular, take every precaution to protect the front and rear panels.
Finish the package by sealing it up tightly.
Apply  a  FRAGILE  label  to  the  package  to  encourage  greater  care  in  its
handling.

2.5 Instrument cleaning

Use a dry, clean and non-abrasive cloth for cleaning the meter.

Do not use solvents, acids, turpentine, acetone or other similar
products for cleaning the meter in order to avoid damaging it.

Document LR01EN-30604-2.10 -



NARDA 2023

«
...
59
60
61
62
63
...
»

Содержание LR-01



































































































































































































Отзывы:

Нет отзывов