NARDA LR-01 Скачать руководство пользователя страница 130 | Manualshive

Страница: 130 / 194

NARDA LR-01 Скачать руководство пользователя страница 130

9-2

Command protocol

At power ON, LR-01 is automatically set to listen to both the USB and the
optic port for incoming commands.
The optic port will be always available for communicating with the unit.
User’s  own  software  can  ask  for  measurement  data  when  desired  or  can
switch  the  LR-01  to  master  mode  where  measurement  data  are
continuously sent over the communication port, without the need of asking
for each.
At any time the operation mode can be switched back to slave mode.
While  operating  in  slave  mode,  LR-01  sends  answers  to  the  received
commands, according to the communication protocol described below.
The  LR-01  automatically  turns  off  30  minutes  after  receiving  the  last
command, to save battery.

Please, do not try any commands not covered in this manual, as
random poking can cause the system to crash or lose data and
calibrations.

«
...
128
129
130
131
132
...
»

Содержание LR-01



































































































































































































Отзывы:

Нет отзывов