STEP 1:
1.
Check the regulator to the propane tank connection
remember the POL adapter is a left-hand thread.
2.
Check all connections on the hose regulator assembly
3.
Check the hose to the intake hose to make certain that
it is not kinked or in a position that could cause it to
kink. Tighten hand tight and then take a 1/2 turn with
the adjustable wrench.
NOTE: The remaining connections are to be tested after
the heater has been lit.
STEP 2:
4.
Intake hose fitting at the bottom of safety control
valve.
5.
Pilot tubing to safety control valve.
6.
Orifice fitting and the safety control valve.
7.
Pilot tubing and pilot.
NOTE:
After leak testing is completed and all leaks
are sealed, close the door to the tank enclosure and
your patio heater is ready to use.
SAFETY CHECKS
Page 10
STEP 1.
2
1
3
STEP 2.
7
5
6
4
Содержание PTH-103-3G
Страница 5: ......
