Napoleon PTH-103-3G, Инструкции по установке, эксплуатации и обслуживанию

Страница: 9 / 21

ASSEMBLY INSTRUCTION
Page 7
STEP 8: Attach The Post
.

Screw the 1/4
”
x2 3/4
”
threaded ends stud into
emitter top.

Attach the reflector dome cap and nut on the
emitter top. It screws on threaded stud screwed
onto emitter top.

Insert gas hose through post.

Attach the post on to heater head with four of
3/16
”
truss head screw.
STEP 7. Attach Reflector

Combine three pieces reflector together

Tighten up with three 5/32 ” screws.

Put the reflector plate on reflector then tight up with
three 1/4
”
screw by upward.
STEP 7
STEP 8