INSTALLATION INSTRUCTIONS
Installation Instructions
KEH067A41E(A), KEH063A4E(A),
FTDBHMS, FTDBHML
IOD-7133A
11/2021
Our continuing commitment to quality products may mean a change in specifications without notice.
© 2021
19001 Kermier Rd. Waller, Tx 77484
Only personnel that have been trained to install, adjust,
service or repair(hereinafter, “service”) the equipment
specified in this manual should service the equipment.
The manufacturer will not be responsible for any injury
or property damage arising from improper service or
service procedures. If you service this unit, you assume
responsibility for any injury or property damage which
may result. In addition, in jurisdictions that require one or
more licenses to service the equipment specified in this
manual, only licensed personnel should service the
equipment. Improper installation, adjustment, servicing
or repair of the equipment specified in this manual,
or attempting to install, adjust, service or repair the
equipment specified in this manual without proper training
may result in product damage, property damage, personal
injury or death.
WARNING
SAFETY CONSIDERATIONS
Read these
Safety Considerations
carefully before
installing the drain pan heater. After completing the
installation, check if the unit operates properly during the
start-up operation.
Meaning of
DANGER
,
WARNING
, and
CAUTION
symbols
DANGER
Indicates an imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous
situation which, if not avoided,
could result in death or serious
injury.
CAUTION
Indicates a potentially hazardous
situation which, if not avoided, may
result in minor or moderate injury.
It may also be used to alert against
unsafe practices.
• Inform users that they should store this installation
manual for future reference.
•
After completing the installation, make sure that the
unit operates properly during the startup operation.
•
All phases of the field-installation, including, but not
limited to, electrical, piping, and safety, must be done
in accordance with manufacturer’s instructions and
must comply with national, state, provincial, and local
codes.
•
This product is a heater designed to melt snow that is
blown into the product from the outside to prevent the
drain pan of the outdoor unit from freezing.
•
Install the product with a snow-break hood on a high
stand if this product is used in heavy snow areas.
DANGER
Do not touch the heater unit without wearing gloves.
The temperature of the heater unit will become high when
the heater is turned on. Touching the heater unit with bare
hands will result in burns or injury.
WARNING
• Wear protective gloves at the time of installation.
Touching the suction mouth or aluminum fin of the
outdoor unit may result in injury.
• Do not install the product in places where there is
danger of exposure to inflammable gas leakage.
If the gas leaks and builds up around the unit, it may
catch fire.
• Do not grab the top plate of the outdoor unit
carelessly when removing the top plate.
The sharp edge of the top plate may cause injury.
• Do not install the outdoor unit in places where small
animals may nest in the outdoor unit.
If small animals intrude and touch the internal parts
of the outdoor unit, the outdoor unit may malfunction,
generate smoke, or ignite Advise the user to keep the
place clean.
• Do not touch the heater unit with bare hands.
The temperature of the heater unit will become high
when the heater is turned on.
Touching the heater unit with bare hands may result in
burns or injury.
