4
INSTALLING, ACTIVATING AND CONFIGURING THE ISEE-SCHGW
The installation and activation of the VideoAlert system has been designed to be "plug and play", requiring no special
training or tools and no knowledge of TCP/IP or networking for typical installations. The primary installation steps de-
picted below are covered in detail on the following pages:
1
Install the ISEE-SCHGW gateways and cameras, (page 5)
2
Wire The Network Connection. (page 6)
3
Activate the new ISEE-SCHGW account on the VideoAlert server
.
(page 7)
4
Configure the gateway for motion detection triggering (Optional) (Page 12).
(Optional) The gateway may be configured for motion detection on-line by simply going to www.VideoAlert.net,
and entering the gateway security code number printed on the sticker on the bottom of the gateway.
BROADBAND
MODEM
CUSTOMERS ROUTER
(OPTIONAL)
Alternate G-BOX
configuration to be
used for optimum
performance in
cable broadband
installations
CUSTOMER'S PC
FROM BROADBAND
PROVIDER
OVERVIEW OF TYPICAL ISEE-SCHGW INSTALLATION
(Power connections not shown)
ISEE-SCHGW
ISEE-SCHGW
Содержание iSeeVideo ISEE-SCHGW
Страница 19: ...19 NOTES...