NAPCO Gemini GEM-TOUCH K Series, Руководство по эксплуатации

Страница: 27 / 32

GEM - TOUCH K Style Keypad Operating Guide
27
E10 - NNN -- Keypad Response Failure
Call installing company for service.
E11 - NNN -- Keypad Tamper
The control panel has been opened,
or a wall - mounted keypad has been
opened and/or removed from the
wall. Call installing company for ser-
vice if problem cannot be repaired.
E15 - NNN -- RF Transmitter Tamper
Wireless transmitter cover removed
(NN = transmitter number). Call in-
stalling company for service.
E16 - NNN -- Wireless Receiver Jam
A problem has been detected with
the wireless receiver. Call installing
company for service.
E17 - NNN -- Receiver Tamper Condi-
tion
Call installing company for service.
E18 - NNN -- Keyfob Transmitter Low
Battery
A keyfob transmitter has indicated its
power cell(s) are weak and should be
replaced. The 4 - button RR -
4BKEYFOB uses a 3V Lithium coin
cell battery (replace with type
CR2032 or Duracell DL2032 only).
The 1 - button RR - 1BUTTON uses
two Energizer 386 1.5V silver oxide
cells (the unit will also flash its LED to
warn of a low - battery). Warning:
Replace batteries only with the same
type as specified above. Use of an-
other battery may present a risk of
fire or explosion. Do not recharge or
disassemble battery, or dispose of in
fire.
E40 - NNN -- RF Self - Test Failure
A wireless motion sensor on the zone
indicated has failed its automatic self -
test routine. Call installing company
for service.
E41 - NNN -- Fire Trouble
A problem has been detected on the
fire zone indicated. Call installing
company for service.
E42 - NNN -- CO Zone trouble
A problem has been detected on the
carbon monoxide zone indicated.
Call installing company for service.
E51 -- Bell/Siren Trouble
There is a problem with the bell or
siren. Call installing company for
service.
S Y S T EM T R O UB L E E R R O R CO D E S ( c o n t' d )