12
GEM
-
TOUCH
K Style
Keypad Operating Guide
F I R E P R O T E C TI O N
(Applicable only where local ordinances permit use of this alarm system for fire protection).
Fire
-
Zone Alarm
If a fire is detected, the alarm will sound, the zone number will appear on the keypad, the keypad sounder will pulse
and the keypad "fire" icon (shown at left) will flash.
•
If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department from an
outside telephone.
If there is no evidence of a fire:
•
If the system is disarmed, at the Home screen, tap
Arm
, enter your User Code and tap
Enter
to silence the
alarm.
•
If the system is armed, at the Home screen, tap
Disarm
, enter your User Code and tap
Disarm
to silence
the alarm.
•
Check the smoke detector(s). If a smoke detector tripped, its red alarm indicator light will be on.
•
After the alarm condition is corrected (thermostat cooled down; smoke cleared from detector; etc.), at the
Home screen tap/hold
-
down
Reset
and enter your User Code and tap
Enter
to reset the system.
Note:
This
reset process may take up to about 10 seconds to complete.
Fire
-
Zone Trouble
•
The system is constantly monitoring the fire zone(s) to ensure they are in good working
order.
•
If a problem on a fire zone is detected, a system trouble
E
-
41
-
NN
will flash on the keypad,
followed by the number of the fire zone in trouble ("
NN
"). The sounder will activate and the
TROUBLE
icon will flash on the keypad.
•
At the Home screen, tap/hold
-
down
Reset
, enter your User Code and tap
Enter
to silence
the sounder. Call for service immediately!
(TROUBLE Icon)
