GEM
-
TOUCH
K Style
Keypad Operating Guide
21
P R O G R AM M I NG U S E R C O D ES
Existing User Codes may be edited using the GEM
-
TOUCH keypad. Each User should be assigned their own unique
User Code and should be cautioned against divulging their Code to anyone else.
Note:
Duplicate User Codes are not
allowed by the system. Depending on your system control panel, User Codes may contain up to 6 digits or as few as a
two to allow for quick arming. If you need additional User Codes, contact your installing company.
Enter System Settings
1.
From the Home screen, tap/hold
-
down
Menu
.
2.
Using the number buttons, enter your User Code (the same User Code you use to arm and dis-
arm), then tap
Enter
. The
Function Menu
screen appears.
3.
Tap
Up
/
Down
until
Activate Program Y/N
appears, then tap
Enter
. The
SYSTEM SETTINGS
screen appears.
4.
Tap
User Codes
. In the
Add/Edit User Code
screen that appears, you can review and edit exist-
ing User Codes. Proceed as follows:
Reprogramming an Existing User Code
Each User Code is assigned a "
User#
" (user number).
1.
Tap the
User#
field. In the keypad that appears, enter the digits of the
User#
to be programmed then tap
Enter
.
Note:
If the
User#
entered does not yet have a User Code programmed, the
User Code
field will be blank.
2.
Tap the
User Code
field. In the keypad that appears, enter the new User Code (up to 6 digits), followed by
Enter
.
If you make a mistake, simply tap
Clear
and start again.
3.
When finished, tap
Save
.
System Settings
("gears") icon
