ENGLISH
Cod. 9828093587 00 - Edition 11/2021 - 21
17.2 TROUBLE-SHOOTING AND EMERGENCY REMEDIES
Fault messages
Flashing fault message
Description
Remedy
Dewpoint temperature probe failure Replace the probe
Refrigerant compressor discharge
temperature probe failure
Replace the probe
Pressure dewpoint too high
Refer to the fault and remedies
section
Pressure dewpoint too low
Refer to the fault and remedies
section
Refrigerant compressor discharge
temperature too high; refrigerant
compressor stopped.
Refer to the fault and remedies
section
Internal EPROM error
Reset by pressing one of the four
buttons.
If the problem persists, replace the
controller
Maintenance required
Perform the maintenance and reset
the alarm
