Nanni Q2400 Series, Руководство пользователя

Страница: 45 / 110

45
S06 STARTING & RUNNING
DISPLAY SCREENS & PAGES
STRUCTURES
The displayed information is structured into “pages” and
“screens”. Use PAGE button to switch over the pages.
• The page Measurement consists of screens
which display measured values like voltages,
current, oil pressure etc., computed values like i.e.
gen-set power, statistic data and the alarm list on
the last screen.
• The page Set-points contains all set-points or-
ganized to groups and also a special group for
entering password.
• The page History log shows the history log in the
order that the last record is displayed first.
STARTING & USE
STARTING AND STOP BUTTONS
These buttons are used to start and stop the engine.
START button. Works in MAN mode only.
Press this button to initiate the start sequence
of the engine.
STOP button. Works in MAN mode only. Press
this button to initiate the stop sequence of
the Gen-set. Repeated pressing of button will
cancel current phase of stop sequence (like
cooling) and next phase will continue.
IMPORTANT!
For more information please refer to the Si-2 User Manual
reference: DGBXXT09028A.
MAIN SCREEN
MAIN SCREEN
Symbols
• Padlock – active when LBI ACCESS LOCK is ac-
tive
• R – active when there is active remote connection
to controller
• Exclamation mark – active when there is any
alarm in alarm list