Nanni Q2400 Series, Руководство пользователя

Страница: 55 / 110

55
S 07 MAINTENANCE
MAINTENANCE INTERVALS
COMPONENTS
PERIODICITY
Daily 25 hours
Every
250 hours
Every
500 hours
Every
1000
hours
Every
2000
hours
Fuel system
Water in fuel - Prefilter / Draining - Cartridge
Fuel filter
(
1
)
Injectors
Lube system
Oil level
(
1
)
Oil engine (
1
)
Oil filter (
1
)
Cooling system
Level of cooling system
(
1
)
Cooling fluid (
1
)
Thermostat check (
1
)
Tared plug exchanger (
1
) (
5
)
Exchanger - «O» ring seals (
5
)
Inter-cooler - «O» ring seals (
4
)
Raw water system
Check & cleaning of raw water filter.
Rotoer raw water pump (
1
)
Zinc anodes (
1
)
Air intake circuit & Exhaust.
Turbococharger check (
3
)
Waste Gate free movement and oiling (
3
)
Thermal Protection of Turbococharger (
3
)
Intake air filter (
1
)
Exhaust elbow (
1
)
Electricity
Battery electrolyte level
Harness connectors check
Alternator belt tension check- Replacement
(
1
)
Command panel : Indicators & Alarms lights
Engine (Generalities)
Engine flrxible mounts -Replacement
Status of ducts / Clamps - Nuts
Visual check
(Leak cooling fluid, Fuel, oil, Sea water, etc...)
Valves check
Alternator
Check all screws / Fitting bolts (
2
)
Clean the cooling system (
2
)
Status of protective vents (
2
)
Overall cleaning (
2
)
(
1
) Operations must be performed in accordance with the operation and maintenance manuals for your engine. For all technical information specific to your engine, refer to the operation and maintenance manual.
(
2
) Operation to be performed in accordance with the manufacturer’s operation and maintenance manual.
(
3
) Only Q3300 & Q3800 are concerned
(
4
) Only Q3800 is concerned
(
5
) Q1100 series are out of scope
CHECK/AJUST/CLEAN/SERVICE/REPLACE AS REQUIRED REPLACE