Nanni Q2400 Series, Руководство пользователя

Страница: 54 / 110

54
S 07 MAINTENANCE
GENSET MAINTENANCE
ABOUT THIS MANUAL
This manual describes the preventive maintenance oper-
ations to be performed by the owner or operator of the
equipment. It is not a workshop repair manual.
Performing a series of preventive maintenance opera-
tions in accordance with the maintenance intervals will
ensure optimal reliability and life of the motor.
During the warranty period, it is essential to have all work
performed by an authorized Nanni workshop. In addition,
all service should be recorded in the Nanni after-sales
system.
However, some regular checks, in particular those carried
out each time the unit is used, are the duty of the end user.
Nevertheless, some operations are described for emer-
gency cases, or if there is no qualified repair shop nearby.
Repairs or adjustments to the engine by technicians not
trained in marine techniques are prohibited for obvious
safety reasons. Operations related to the timing and in-
jection system are the exclusive responsibility of Nanni’s
trained representatives. These operations may be con-
trary to EPA standards or other worldwide environmental
regulations.
NOTE!
The hour meter cannot be reset: it displays the total num-
ber of hours the engine has been running since the facto-
ry acceptance tests.
GENERALITIES
WARNING!
Perform maintenance with the engine stopped and cold.
Remove the ignition key, put it in your pocket and turn off
the power.
Read this chapter and take all necessary safety precau-
tions before considering any maintenance or repair work.
Make sure you understand how to perform each opera-
tion.
CAUTION!
Clean the engine before servicing. Watch for any oil or
fluid spillage, which is a sign of leakage.
CAUTION!
Do not allow oil, fuel or grease deposits to build up around
the unit as they may increase the risk of fire in the engine
compartment. These deposits may hide malfunctions.