Nanni N9.330 CR2 Скачать руководство пользователя

Страница: 16 / 108

Always remove grounded (-) battery clamp first and

replace grounded clamp last. Sulfuric acid in battery

electrolyte is poisonous and strong enough to burn skin,

eat holes in clothing, and cause blindness if splashed

into eyes.

Avoid hazards and acid burns in :

• Filling batteries in a well-ventilated area

• Wearing eye protection and rubber gloves

• Avoiding use of air pressure to clean batteries

• Avoiding breathing fumes when electrolyte is

• Avoiding spilling or dripping electrolyte

• Using correct battery booster or charger procedure.

If acid is spilled on skin or in eyes:

•

Flush skin with water

•

Apply baking soda or lime to help neutralize the acid

• Flush eyes with water for 15-30 minutes.

• Get medical attention immediately.

If acid is swallowed:

• Do not induce vomiting

•

Drink large amounts of water or milk, but do not

exceed 2 L (2 qt.)

• Get medical attention immediately.

PREVENT BATTERY EXPLOSIONS

Keep sparks, lighted matches, and open

flame away from the top of battery. Battery

gas can explode. Never check battery

charge by placing a metal object across

the posts. Use a volt-meter or hydrometer.

Do not charge a frozen battery: it may

explode. Warm up battery to 16°C (60°F) before doing it.

S02

SAFETY

WARNING !

Battery posts, terminals, and related accessories contain

lead and lead compounds. Rinse hands after handling

batteries.

FROST PROTECTION - WINTERIZATION

See Maintenance Section 08 - Raw Water System - Risk

of icing conditions / Protection against frost.

WARNING !

When the engine has been set for winterization, place

“

DO NOT OPERATE

” labels onto taps, valves, parts of

equipment which have been turned off. Place a large and

visible reminder on the wheelhouse dashboard.

LIVE WITH SAFETY

Before returning engine to customer, make sure engine

is functioning properly, especially the safety systems.

Make sure that all guards and shields are in place.

PREVENT ACCIDENTS

IMPORTANT !

When engine is OFF, always set the transmission lever to

neutral position.

Содержание N9.330 CR2













































































































Результаты поиска

Содержание N9.330 CR2

Отзывы:

Похожие инструкции для N9.330 CR2

Бренды по названию

Популярные бренды

Nanni N9.330 CR2, Руководство оператора

Результаты поиска

Содержание N9.330 CR2

Отзывы:

Похожие инструкции для N9.330 CR2

Бренды по названию

Популярные бренды