Nanni N9.330 CR2, Руководство оператора

Страница: 30 / 108

30
C4 PANEL
C4 REAR PANEL CONNECTIONS
Nanni assembled panels are plug and play directly to the
engine via an extension cable.
C4 SEPARATE INSTRUMENTS
STARTER SWITCH
This device allows to start and to stop the engine.
On/Stop : This button allows to turn on the electric
system and to stop the engine
Start : To preheat the engine, push the button halfway for
10 to 20 seconds depending on the outside temperature.
To start the engine, press the button fully.
COOLANT TEMPERATURE
This warning lamp comes on and the alarm sounds
when the coolant temperature is too high.
DANGER !
Never open the coolant filler cap or any plug of the
cooling system when the engine is warm. Steam or hot
fluid can spray out.
CAUTION !
If this alarm comes ON while operating the engine, stop
the engine, exept in extreme emergencies. Wait for the
engine to cool down. Check the coolant level, the belt
condition, the raw water filter, and if the sea cock is open.
To operate an engine when temperature is too high
can lead to a severe engine damage. Do not operate
the engine if the problem persist and contact a Nanni
representative as soon as possible.
BATTERY CHARGE
This warning lamp comes for a short time when the
electric system is turned on.
Should this lamp comes on when the engine is running,
this indicates that the alternator is not charging.
S05 INSTRUMENTS