Nanni N9.330 CR2, Руководство оператора

Страница: 79 / 108

79
If the battery electrolyte level cannot be adjusted
(maintenance free battery type), do not use or charge the
battery if the fluid level is below the lower limit level.
If the battery has been left unattended for an extended
period of time, it is likely that the battery has entered in
a deep discharge process. In such a case, voltage read
would be around 7 Volts or so. In such a case, it would be
very unlikely for the battery to recover and it is to fear that
any charge attempt will fail.
ALTERNATOR BELT
The engine alternator is driven by a belt through pulleys.
These components must be in good order at all times in
view for the alternator to provide electricity, among others,
to the engine, to the battery, to the engine control panel.
DANGER !
Stop the engine and remove the key before checking or
servicing the alternator belt.
NOTE !
Always keep a spare replacement belt on-board.
IMPORTANT !
A loosen or damaged belt can result in overheats or lack
of alternator charge. A too tighten belt can damage the
bearings of the water pump and of the alternator.
VISUAL CHECK OF THE ALTERNATOR BELT:
If belt internal wires become visible and frayed, replace
it. Check that belt fits properly in the pulleys. Belt is
constantly put under tensioning device.
TO REPLACE THE BELT:
1. Stop the engine and remove the key from the panel.
2. Carefully remove beltguard cover from engine.
3. Release tension on belt on tension arm and remove
poly-vee belt from pulleys.
4. Install the new belt. Check that the belt seats nicely
between the flanges of all the pulleys.
5. Apply tension to belt with tensioner.
S08 MAINTENANCE