7. NKD1 FRESH WATER SYSTEM MENU GUIDE
www.naked-pools.com
18
7.2 Brightness
BRIGHTNESS is entered by pressing the [OK] button in the MAIN MENU and scrolling to
B
RIGHTNESS (Menu 2).
T
he factory setting is 65%.
P
ressing [+] or [-] allows you to adjust the BRIGHTNESS. Pressing [OK] saves the required
B
RIGHTNESS and returns to the DDS screen.
P
ressing [<]
returns you to the previous screen.
7.4 OXI Boost
7.3 Cell Cleaning – OXI Cell Reversing Time
Smart self-cleaning technology allows the polarity of the OXI Cell plates to change
direction every 4-16hrs (depending on your setting). The change of polarity causes the
calcium to dislodge and keep the OXI plates clean. Please note occasional cleaning
of the plates may be necessary.
T
he factory setting is every 10 hours and this can be adjusted from as low as 4 hours
(for high calcium areas) and as high as 16 hours.
I
n areas where the calcium hardness of the water is low (less than 200ppm) cleaning of the cell may not be
necessary. Where calcium levels exceed 200ppm, regular inspection of the cell is necessary. Cleaning in an
acid solution may be necessary.
C
ELL CLEANING is entered by pressing the [OK] button in the MAIN MENU and scrolling to CELL CLEANING (Menu 3).
P
ressing [+] or [-] allows you to adjust the CELL CLEANING time in one hour increments and is displayed as shown to
the right.
P
ressing [<]
returns you to the previous screen.
7.1 Backwash
See 6.6 BACKWASH
(CONTROL PANEL OPERATION)
See 6.3 OXI
